Table of Contents
Advertisement
Overview of Internal Sections
Key Range
The Key Range setting allows the key range of each sound section to be specified. By default, each internal section
will utilise all keys of the keyboard. However, it is also possible to easily create upper/lower splits or specify a
zone between two defined keys.
Key Range types
Key Range type
Full Keyboard
(default)
Lower
Upper
Zone
S electing Key Range types
Press the KEY RANGE button to cycle through the different key
range types for the selection sound section.
The LED indicators will turn ON or OFF to indicate the selected
Key Range type.
* The default Lower/Upper split point is set to F#2.
* The Lower/Upper split point is common for all internal sound sections and
external MIDI zones. For more information about common parameters,
please refer to page 38.
C hecking the Lower/Upper split point
After selecting Lower/Upper key range type:
Press and hold the KEY RANGE button.
The current split point will pop-up in the LCD display.
Common
parameter:
See page 38
Release the KEY RANGE button
The split point pop-up will disappear.
2
Key Range LED
Description
OFF
The selected sound section will be played with all 88 keys of the keyboard.
The keyboard is split into two parts, the lower part of the keyboard (from a defined
Lower ON
split point to the bottom-most key) is used to play the selected section.
The keyboard is split into two parts, the upper part of the keyboard (from a defined
Upper ON
split point to the top-most key) is used to play the selected section.
Upper + Lower ON
A zone between two defined keys is used to play the selected section.
Current
split point:
F#2
Default:
Full Keyboard
Press once:
Lower split
Press twice:
Upper split
Press three times:
Zone
Advertisement
Table of Contents
