Table of Contents
Advertisement
2
LCD Display & Control Knobs
In regular Play Mode the LCD display provides a visual indication of the selected section and sound, and the values
of the four real-time control knobs (A, B, C, and D).
The function of each knob can be assigned to control any parameter in the EDIT menu, allowing frequently used
functions to be accessed from a single screen. Furthermore, two groups of knob parameters (2 x ) can be defined
for each of the PIANO, E.PIANO, SUB sections and MIDI zones, providing extensive real-time control.
Control knobs:
Adjust value of assigned
parameter or setting.
Function buttons:
Select section/MIDI zone,
various other operations.
S electing sections, primary/secondary knob groups
Press the function buttons located below the LCD display to
select the desired internal section.
The section icon will become highlighted, and the name of the
selected sound and primary group of knob parameters will be
shown in the LCD display.
Press the same function button to cycle between the primary
and secondary group of knob parameters in the LCD display.
T oggling between internal sections and MIDI zones
Press the INT/MIDI button to toggle between showing the
internal sections and MIDI zone volumes in the LCD display.
* For more information about MIDI zones, please refer to page 36.
A djusting parameters
Turn the four control knobs (A, B, C, D) located on either side of
the LCD display to adjust the displayed knob group parameters.
* EDIT menu parameters can be freely assigned to each of the four knobs in
the Knob Assign page of the EDIT menu (page 48).
Parameters can also be adjusted by using the CURSOR buttons
to move the selection cursor, and +/YES or –/NO buttons to
increase or decrease the value of the selected parameter.
Selected sound
Selected section/knob group
INT/MIDI button:
Toggle between displaying
internal sections & MIDI zones.
21
Advertisement
Table of Contents
