Table of Contents
Advertisement
Part Names & Functions
1
Front Panel: Knobs, Faders & Buttons
Control Wheels
Volume Faders
PIANO Section
EFX/REVERB buttons
These buttons turn the effects and reverb ON or OFF.
* Press and hold either button to show the respective settings pages of the
EDIT menu in the LCD display.
12
PITCH BEND wheel
This control wheel smoothly bends the pitch up or down from
its current value.
MODULATION wheel
This control wheel controls the modulation (vibrato) depth.
Moving the wheel forward increases the vibrato depth.
The LED indicator will turn ON when this wheel is in use.
* Alternative functions can be assigned to the MODULATION wheel in the
Controllers page of the EDIT menu (page 47).
VOLUME fader
This fader controls the master volume level of the MP11's
NORMAL OUTPUT and HEADPHONE jacks.
* The fader does not affect the level of the FIXED OUTPUT jacks.
LINE IN fader
This fader controls the LINE IN volume level.
ON/OFF button
This button turns the PIANO section ON or OFF.
KEY RANGE button
This button selects the key range of the PIANO section.
UPPER/ZONE/LOWER LEDs
These LEDs indicate the key range to which the PIANO section
is assigned.
VOLUME fader
This fader controls the volume level of the PIANO section.
CONCERT/POP/JAZZ/UPRIGHT-MONO buttons
These buttons select the category of the piano sound.
1/2/3 buttons
These buttons select the piano sound from each category.
Advertisement
Table of Contents
