Midi - Kawai MP11 Owner's Manual

SYSTEM Menu parameters & functions


MIDI

1. System Channel
This parameter determines the System MIDI channel used to
receive MIDI messages when Receive Mode is set to Panel.
* The default setting is 01Ch.
3. Key to USB
This parameter determines whether or not keyboard events
are transmitted via USB-MIDI.
* The default setting is ON.
5. MIDI to USB
This parameter determines whether or not received MIDI IN
events are transmitted via USB-MIDI.
* The default setting is OFF.
7. SETUP Program
This parameter determines whether or not the Send Program
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Program parameter, please refer
to page 54.
* The default setting is OFF.
9. SETUP Volume
This parameter determines whether or not the Send Volume
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Volume parameter, please refer to
page 54.
* The default setting is OFF.
11. Receive Mode
This parameter determines how the MP11 receives MIDI data.
Mode Description
Panel Received data controls the entire panel.
Received data controls sections individually via each
Section
receive channel.
Received data controls the whole panel, regardless of
Omni On
the MIDI channel.
* The default setting is Panel.
13. E.PIANO Channel
This parameter determines the E.PIANO section's Receive
Channel when the Receive Mode parameter is set to Section.
* The default setting is 02Ch.
102
2. Key to MIDI
: 01 ~ 16
value cH cH
This parameter determines whether or not keyboard events
are transmitted via MIDI OUT.
* The default setting is ON.
4. MIDI to MIDI
o , o
n ff
This parameter determines whether or not received MIDI IN
events are transmitted via MIDI OUT.
* The default setting is OFF.
6. USB to MIDI
o , o
n ff
This parameter determines whether or not received USB-MIDI
events are transmitted via MIDI OUT.
* The default setting is OFF.
8. SETUP Bank
o , o
n ff
This parameter determines whether or not the Send Bank
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Bank parameter, please refer to
page 54.
* The default setting is OFF.
10. SETUP Knobs
o , o
n ff
This parameter determines whether or not the Send Knobs
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Knobs parameter, please refer to
page 54.
* The default setting is OFF.
12. PIANO Channel
p , s , o o
anel ection mni n
This parameter determines the PIANO section's Receive
Channel when the Receive Mode parameter is set to Section.
* The default setting is 01Ch.
14. SUB Channel
: 01 ~ 16
value cH cH
This parameter determines the SUB section's Receive Channel
when the Receive Mode parameter is set to Section.
* The default setting is 03Ch.
o , o
n ff
o , o
n ff
o , o
n ff
o , o
n ff
o , o
n ff
: 01 ~ 16
value cH cH
: 01 ~ 16
value cH cH