Pedal - Kawai MP11 Owner's Manual

SYSTEM Menu parameters & functions
2

Pedal

1. Right Pedal Mode
This parameter determines the global operation for the right
pedal of the F-30 pedal unit.
* The default setting is Normal.
2. Center Pedal Mode
This parameter determines the global operation for the centre
pedal of the F-30 pedal unit.
* The default setting is Normal.
4. Half Pedal Adjust
This parameter adjusts the point at which the damper/sustain
pedal becomes effective (i.e. when the dampers of the piano
begin to lift from the strings).
This parameter may be useful for pianists that habitually rest their
right foot on the damper/sustain pedal, but do not necessarily
wish to sustain the sound.
* The default setting is 5.
6. Center Pedal Polarity
This parameter changes the polarity for the centre pedal.
* The default setting is Normal.
8. EXP Pedal Curve
This parameter changes the output level curve for the
connected expression (EXP) pedal, providing additional control
over the speed of expression pedal controlled effects.
* The default setting is Normal.
Normal curve
Pedal Position
100
 P edal modes
5
functions
Mode
Normal
Setup+
Setup-
Playback
Metro.
3. Left Pedal Mode
5
functions
This parameter determines the global operation for the left
pedal of the F-30 pedal unit.
* The default setting is Normal.
5. Right Pedal Polarity
: 1 ~ 10
value
This parameter changes the polarity for the right pedal.
When using the included F-30 triple pedal unit, it is recommended
to leave this parameter set to 'Normal'. When using an alternative
pedal, it may be necessary to select the 'Reverse' setting.
* The default setting is Normal.
7. Left Pedal Polarity
n , r
ormal everse
This parameter changes the polarity for the left pedal.
* The default setting is Normal.
9. EXP Pedal Polarity
n , s , f
ormal low ast
This parameter changes the polarity for the connected
expression (EXP) pedal.
* The default setting is Normal.
Slow curve
Pedal Position
Description
The pedal will use the assigned EDIT menu function.
The pedal will select the next SETUP memory.
The pedal will select the previous SETUP memory.
The pedal will start/stop song playback.
The pedal will start/stop the metronome.
Pedal Position
5
functions
n , r
ormal everse
n , r
ormal everse
n , r
ormal everse
Fast curve