Reset - Kawai MP11 Owner's Manual

SYSTEM Menu parameters & functions


Reset

The Reset category contains functions to reset sounds, setups, and settings back to the original factory default.
Once performed, these Reset functions cannot be undone.
Exercise caution when using this function in order to prevent accidental data loss.
1. Reset One Sound
This function resets the currently selected sound to the factory
default.
The currently selected sound will be shown in the LCD display.
* It is also possible to select the sound to be reset by pressing the sound
category and variation buttons.
3. Reset All Sound
This function resets all sounds to the factory default.
5. Reset System
This function resets all SYSTEM parameters, including Utility,
Pedal, Offset, and MIDI parameters in the SYSTEM menu, and
SETUP, Transmit, and MMC parameters in the MIDI section EDIT
menu.
7. Reset Recorder
This function resets all internal song recorder memories.
Panic button
The PANIC button restores all internal sounds to their default PowerOn setting, and also sends the AllNoteOff and
ResetAll Controller MIDI messages to any connected devices (01ch ~ 1ch).
This is a useful function to be used in emergency situations, or to immediately restore the MP11 to a preferred
configuration without turning the power OFF and ON.
 A ctivating the Panic function
Press and hold the PANIC button.
After one second, the MP11 will be returned to the default
PowerOn configuration.
10
2. Reset One Setup
This function resets the currently selected SETUP memory to
the factory default.
The currently selected SETUP will be shown in the LCD display.
* It is also possible to select the SETUP memory to be reset by pressing the
BANK  buttons and SETUP memory buttons.
4. Reset All Setup
This function resets all SETUP memories to the factory default.
6. Reset PowerOn
This function resets the PowerOn memory to the factory
default.
8. Factory Reset
This function performs a global reset of all sounds, SETUPs,
SYSTEM settings, and internal song recorder memories.