Key Setup - Kawai MP11 Owner's Manual

EDIT Menu parameters


Key Setup

1. Key Range Type
This parameter selects the Key Range type for the selected
zone.
Type Description
Off The zone is used for all 88 keys of the keyboard.
Upper The zone is used for the upper split.
Lower The zone is used for the lower split.
Zone The zone is used for a defined zone between two keys.
* This parameter is not stored to SOUND but to SETUP only.
5. Octave Shift
This parameter adjusts the amount of octave transposition for
the selected zone.
7. Zone Transpose
This parameter adjusts the amount of transposition for the
selected zone.
9. Key Scaling Key
This parameter defines the point on the keyboard from which
Key Scaling Damping should be applied, up to the highest key.
11. Solo
This parameter determines whether or not playing will be
restricted to single notes, even when more than one note is
played simultaneously.
This parameters can be used to effectively simulate the performance
characteristics of a monophonic synthesizer.
13. Transmit Keyboard
This parameter determines whether or not keyboard Key ON/
Key OFF event data will be transmitted to an external MIDI
device.

(MIDI)
2. Split Point
o , u , l , z
ff pper ower one
This parameter defines the point on the keyboard at which the
upper and lower parts are divided.
* For more information about Key Range functions, please refer to page 26.
* This parameter is common for all three sound sections and all MIDI zones.
3./4. Key Range Zone Lo/Hi
These parameters define the bottom and top keys of the key
range zone.
* For more information about Key Range functions, please refer to page 26.
6. Touch Curve
: –3 ~ +3
value octaves
This parameter selects the touch response curve of the
keyboard for the selected zone.
* For more information about touch curve types, please refer to page 46.
* For information about creating User Touch Curves, please refer to the
User Edit explanation in the SYSTEM menu chapter (page 104).
8. Key Scaling Damping
: –12 ~ +12
value
This parameter determines whether or not damping (velocity
reduction) should be applied to a zone over a specific range.
10. Dynamics
: a-1 ~ c7
range
This parameter adjusts the keyboard response (velocity
compression) of the selected zone independently of the touch
curve.
* For more information about dynamics, please refer to page 46.
12. Solo Mode
o , o
n ff
This parameter selects the solo mode for the selected zone.
Solo Mode
Last
High
Low
o , o
n ff
Description
Play the last note of a group of notes.
Play the highest note of a group of notes.
Play the lowest note of a group of notes.
: a-1 ~ c7
range
: a-1 ~ c7
range
6 + 5
types user
o , o
n ff
: o , 1 ~ 10
value ff
l , H , l
ast igH ow