Table of Contents
Advertisement
Controllers
1. Right Pedal
This parameter determines whether or not the right pedal of
the F-30 pedal unit is active for the selected section.
3. Soft Pedal Depth
This parameter adjusts the effectiveness (i.e. depth/strength)
of the soft pedal.
5. Center Pedal
This parameter determines whether or not the centre pedal of
the F-30 pedal unit is active for the selected section.
7. Left Pedal
This parameter determines whether or not the left pedal of the
F-30 pedal unit is active for the selected section.
9. Pitch Bend
This parameter determines whether or not the pitch bend
wheel is active for the selected section.
11. Modulation Wheel
This parameter determines whether or not the modulation
wheel is active for the selected section.
13. Expression Pedal
This parameter determines whether or not the expression
pedal (if connected) is active for the selected section.
* For more information about connecting pedals, please refer to page 18.
Assignable pedal/modulation wheel functions
Function
Modulation
Panpot
Expression
o
, o
n
ff
: 1 ~ 10
value
o
, o
n
ff
o
, o
n
ff
o
, o
n
ff
o
, o
n
ff
o
, o
n
ff
Function
Damper
Sostenuto
Soft
2. Right Pedal Assign
This parameter selects the function assigned to the right pedal
of the F-30 pedal unit.
* This parameter is common for all three sound sections.
4. Damper Pedal Mode
This parameter determines whether or not the damper pedal
should sustain sounds indefinitely without decay.
6. Center Pedal Assign
This parameter selects the function assigned to the centre
pedal of the F-30 pedal unit.
* This parameter is common for all three sound sections.
8. Left Pedal Assign
This parameter selects the function assigned to the left pedal
of the F-30 pedal unit.
* This parameter is common for all three sound sections.
10. Pitch Bend Range
This parameter sets the range of the pitch bend wheel in semi-
tone steps.
* The range differs for the internal sound (0 ~7) and MIDI (0~12) sections.
12. Modulation Wheel Assign
This parameter selects the function assigned to the MP11's
modulation wheel.
14. Expression Pedal Assign
This parameter selects the function assigned to the expression
pedal (if connected).
* This parameter is common for all three sound sections.
* For more information about connecting pedals, please refer to page 18.
Function
Resonance
Cut-off
EFX Parameter 1 ~ 10 (
,
)
piano
suB
EFX1 Parameter 1 ~ 10, EFX2 Parameter 1 ~ 10 (
18
(
,
)
functions
piano
suB
28
(
.
)
functions
e
piano
n
, H
ormal
old
18
(
,
)
functions
piano
suB
28
(
.
)
functions
e
piano
: 0 ~ 7
value
18
(
,
)
functions
piano
suB
28
(
.
)
functions
e
piano
18
(
,
)
functions
piano
suB
28
(
.
)
functions
e
piano
.
)
e
piano
Advertisement
Table of Contents
