Table of Contents
Advertisement
Controllers
1. Right Pedal
This parameter determines whether or not the right pedal of
the F-30 pedal unit is active for the selected zone.
3. Half Pedal Values
This parameter changes the half pedal ranges sent by the right pedal of the F-30 pedal unit for the selected zone.
This parameter is useful when using the MP11 to control external tone generators (e.g. software pianos) that respond to damper pedal behaviour differently.
Half Pedal Value
Value Range
Normal
(default)
0 ~ 127
High
0, 64 ~ 127
Low
0 ~ 63, 127
4. Center Pedal
This parameter determines whether or not the centre pedal of
the F-30 pedal unit is active for the selected zone.
6. Left Pedal
This parameter determines whether or not the left pedal of the
F-30 pedal unit is active for the selected zone.
8. Pitch Bend
This parameter determines whether or not the pitch bend
wheel is active for the selected zone.
10. Modulation Wheel
This parameter determines whether or not the modulation
wheel is active for the selected zone.
12. Expression Pedal
This parameter determines whether or not the expression
pedal (if connected) is active for the selected zone.
* For more information about connecting pedals, please refer to page 18.
o
, o
n
ff
Description
The damper pedal sends a full range of evenly distributed values.
The damper pedal sends a full range of evenly distributed values after the half-pedal point is reached.
The damper pedal sends a full range of evenly distributed values before the half-pedal point is reached.
o
, o
n
ff
o
, o
n
ff
o
, o
n
ff
o
, o
n
ff
o
, o
n
ff
2. Right Pedal Assign
This parameter selects the function assigned to the right pedal
of the F-30 pedal unit.
* This parameter is common for all four MIDI zones.
5. Center Pedal Assign
This parameter selects the function assigned to the centre
pedal of the F-30 pedal unit.
* This parameter is common for all four MIDI zones.
7. Left Pedal Assign
This parameter selects the function assigned to the left pedal
of the F-30 pedal unit.
* This parameter is common for all four MIDI zones.
9. Pitch Bend Range
This parameter sets the range of the pitch bend wheel in semi-
tone steps.
* The range differs for the internal sound (0 ~7) and MIDI (0~12) sections.
11. Modulation Wheel Assign
This parameter selects the function assigned to the MP11's
modulation wheel.
13. Expression Pedal Assign
This parameter selects the function assigned to the expression
pedal (if connected).
* This parameter is common for all four MIDI zones.
* For more information about connecting pedals, please refer to page 18.
cc#0 ~ cc#119, a
ftertoucH
n
, H
, l
ormal
igH
ow
cc#0 ~ cc#119, a
ftertoucH
cc#0 ~ cc#119, a
ftertoucH
: 0 ~ 12
value
cc#0 ~ cc#119,
a
ftertoucH
cc#0 ~ cc#119,
a
ftertoucH
Advertisement
Table of Contents
