TechniSat DiGYBOXX T4 VA Operating Manual page 33

Rpt
> Use the arrow keys to mark the Rpt column
> Press the OK button.
A selection window with different repeat proposals will be displayed.
1x Timer on
D Repeat daily
W Repeat once per week
Use the up/down arrow keys to select the function that you want.
> Press the OK button to import the setting.
Storing the data in the memory
> Press the yellow Accept function key after you have completed the programming
to save the data in the memory.
Any timer events that overlap will be marked in red.
> Press the TV/Radio button to return to normal working.
7.14.2 Timer overview
The timer overview will summerise all of the Timer events that have already been
programmed.
> You can go to the Timer overview menu by calling up the Timer organizing
menu as described above.
> Use the up/down arrow keys to mark the Timer overview line.
> Press OK to confirm.
7.14.2.1 Changing the Timer programming
> You can change an existing timer setting by using the up/down arrow keys to
mark the Timer event that you want to change.
> Press the yellow Modify function key to be taken to the settings for the timer that
you marked. Edit these as described in Section 7.16.1.
> Press the yellow Accept function key after you have completed the programming
to save the data in the memory.
7.14.2.2 Deleting the timer programming
> You can delet an existing timer setting by using the up/down arrow keys to mark
the setting.
> Press the green Delete function key.
The "Really delete this timer?" messagfe will be displayed.
> Use the left/right arrow keys to mark Yes.
> Press OK to confirm that you want this setting to be deleted.
33