Operation; Turning On And Off; Programme Selection; Using The Up/Down Programme Keys - TechniSat DiGYBOXX T4 VA Operating Manual

> Now use the left/right arrow keys to mark the channel with the weakest received
signal.
> Reposition the aerial so that the two cursor bars display maximum amplitude.
red cursor bar
yellow cursor bar
green cursor bar

7 Operation

7.1 Turning on and off

> Press the On/Standby button on the unit or on the remote control to switch the
digital receiver on.
> Press the same button on the unit or remote control once again to switch the unit off
again.
> The unit will now be in Standby mode and this is indicated by the red LED on the
display.

7.2 Programme selection

7.2.1 Using the up/down programme keys

> Use the up/down programme keys on the receiver or the remote control to
switch a programme positionon or off.

7.2.2 Using the numeric keyboard

> Use the numeric keyboard to enter the number of the programme that you want
For example:
1
1, then 4
2, then 3,
poor reception
good reception
very good reception
for programme position 1
for programme position 14
then 4 for programmer position 234
22