Advertisement
Quick Links
How to re-tune to the new frequency of JSTV HD
TechniSat TECHNISTAR S2
＜＜Buttons you need＞＞
Our frequency has been updated.
If you have a TechniSat TECHNISTAR S2, please follow the instructions below to add JSTV HD channels to your decoder.
If your decoder is currently connected to the TV with a SCART cable, connecting with a HDMI cable will allow you to watch JSTV with a higher resolution.
Please note that changing cables means you need to choose a different TV input channel such as HDMI 1.
Please aim the remote control
toward the decoder and operate slowly.
If the decoder fails to respond properly,
we suggest replacing the existing set
of batteries with new ones.
Number Keys
Green
Yellow
矢印ボタ
Blue
Arrow
OK
MENU
Advertisement
Related Manuals for TechniSat TECHNISTAR S2
Summary of Contents for TechniSat TECHNISTAR S2
- Page 1 Our frequency has been updated. If you have a TechniSat TECHNISTAR S2, please follow the instructions below to add JSTV HD channels to your decoder. If your decoder is currently connected to the TV with a SCART cable, connecting with a HDMI cable will allow you to watch JSTV with a higher resolution.
- Page 2 How to remove the old channels (This procedure will take approximately 5 minutes) Press the Menu button on your remote control to show the Main menu on your screen. Using the arrow button, select TV list organizer (fourth item on the list) and press the OK button. When the TV list organizer menu screen appears, make sure the cursor is on the right side of the screen.
- Page 3 Please repeat step “4” and “5” to remove JSTV2. Now, the old channels are removed and new channels are set as channel 1 and 2 Press the Menu button on your remote control to save your settings and close the menu screen. It’s all done!