Initial Installation - TechniSat DiGYBOXX T4 VA Operating Manual

5 Initial installation

After you have read the Safety instructions and connected up the unit as described in
Chapter 4 you can now switch the unit on as described in Chapter 7. The installation
assistant start up window AutoInstall will be displayed the first time that the unit is
switched on. The installation assistant will make it easy for you to set up the digital receiver's
most important settings.
You can exit the initial installation at any time by pressing the red function key. Press the
green function key to return to the previous installation step in order to correct a wrong
entry.
Standard pre-programming will come on when the unit is switched on if you did not run or
exited the initial installation.
The initial installation set up described here is given as an example only. The precise
initial installation will depend on the setting that you make. Follow the instructions displayed
on the screen as precisely as possible
Menu language
> The Menu language selection window will be displayed when the installation
assitant first starts.
> Use the up/down arrow keys to mark and select the working language that you
want to use.
> Press OK to confirm your selection.
> Press OK, to confirm and import your selection.
Country adjustment
> Use the up/down arrow keys to select the time zone that corresponds to your
county.
The time will be set automatically according to your selection.
13