Initial Installation - TechniSat HDFS Quick Start Manual

4 Initial installation

When powering on the satellite receiver for the first time an automatic
installation process will start.
4.1 Welcome and start-up
Press the OK key on the re-
mote control to begin the in-
stallation.
4.2 Antenna configuration
For a standard installa-
tion, accept the default an-
tenna configuration. For
advanced installations, se-
lect 'Modify' and follow the
instructions in conjunction
with the Owner's Manual.
4.3 Software update
The receiver will automati-
cally check for software
updates. If none is found, it
will report that your receiver
has the latest software ver-
sion and will continue with
the installation.