Vertical operating position (optional)
Use the optional rubber feet when you wish to use the device in
the vertical operating position.
The set-up direction is compulsory: The ON/OFF switch must be at
the top to ensure sufficient ventilation.
Proceed as follows to operate the device in the vertical operating position using the rubber feet:
Verticaloperatingposition
Operatingposition,vertical
Base feet
Sidecover
► Disconnect the cables if required.
► Position the casing vertically so that the ON/OFF switch is located at the bottom.
► Pull off the foil from the rubber feet that you will find in the accessories package.
► Affix the rubber feet (1) to the outside of the casing. The positions of the rubber feet
must correspond to the dimensions given so that the device is stable.
► Stand the device on the rubber feet.
A26361-K1180-Z220-1-7619, edition 2
1
1
40 mm
1
1
Getting started
6 mm
9