Installing A Board; Removing Boards - Fujitsu ESPRIMO E3520 Operating Manual

System expansions

Installing a board

2
1
► If necessary, connect the cables to the board.
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.

Removing boards

► If necessary, disconnect the cables which are connected to the board.
1
2
46
► Push the board into the slot (1)
until it engages.
► Tighten the screw (2).
► Loosen the screw (1).
► Pull the board out of the slot (2).
► Place the board in suitable packaging.
A26361-K1180-Z220-1-7619, edition 2