Vertical Operating Position With Feet (Optional) - Fujitsu ESPRIMO D70 Series Operating Manual

Vertical operating position with feet (optional)

Use the optional feet when you wish to use the device in the vertical operating position.
The set-up direction is compulsory: The labels "FUJITSU" and "ESPRIMO" or
"CELSIUS" must be at the top to ensure that sufficient ventilation is provided.
The feet are separable. If you mount only part of the feet at a time, the
device can be pushed completely against the wall, provided, however,
that its ventilation slots are not covered.
The procedure for assembly is identical in both applications. The installation
with complete feet is described below.
You must remove the feet again to be able to open the device.
1 = Position of the screw holes for the feet
Sidecover Base feet Operatingposition,vertical Verticaloperatingposition
Proceed as follows to operate the device in the vertical operating position with the feet:
► If necessary, disconnect the cables connected to the device.
Fujitsu
1
Getting started
1
15