System expansions
Installing the drive cage
Drive cage
Take care not to trap any cables when installing the drive cage.
a
a
1
a
a
► Insert the drive cage on the plastic handle into the casing (1). When doing so, ensure that
the guides (a) are at the height of the corresponding openings on the casing.
2
► Push the drive cage into the casing in the direction of the arrow (2).
► Connect the cables to the drive cage.
► Secure the front panel on the casing again (see
"Securing the front panel", Page
31).
► Close the casing (see
"Close the casing", Page
31).
34
A26361-K1180-Z220-1-7619, edition 2