Chapter 7. Introduction To Netdisk Administrator Tool Menu; Chapter 8. Netdisk Functions - Ximeta NetDisk Wireless Access Point Router User Manual

NetDisk™ Wireless User Manual

Chapter 7. Introduction to NetDisk Administrator Tool Menu

NetDisk Administrator Tool
you named a NetDisk at the registration step, the name will be displayed in place of the default name
NetDisk X. It can also be restored by double Clicking the icon on the Desk Top
Refresh Status
New NetDisk
About
Exit
Click NetDisk Administrator Tool and place the cursor on a NetDisk to view its functions.
Disable
Edit Name
Enable Read Only
Enable Read/Write
Property
Refresh
Remove
XIMETA, Inc
displays all available NetDisks on your computer and/or network. If
: Updates the status of connected NetDisks.
If any NetDisk displays a Black Circle, the network cable or power cable of
that NetDisk is disconnected. This will slow down other NetDisks on the
Network. We recommend removing the Black NetDisk by Selecting the
Black colored NetDisk and choosing Remove
: Registers a new NetDisk onto your computer.
Each time a new NetDisk is added, it must be registered. For more
information please refer to 5-1. Add / Register a New NetDisk
: Displays NetDisk Administrator version
: Exits NetDisk Administrator.

Chapter 8. NetDisk Functions

: Disables writing or reading to and from NetDisk.
Note: If NetDisk is being used by any application, NetDisk will not disable.
Wait until all applications finish using NetDisk before disabling it. If you
cannot disable after several attempts, reboot your computer.
: Updates/Changes the name of the NetDisk.
Type in the new name for NetDisk on Edit a NetDisk window and Click OK.
If you do not want to change the name of the NetDisk, simply Click Cancel.
: Enables Read Only Mode.
: Enables Read / Write Mode.
: Display properties of NetDisk.
: Updates the NetDisk's data from which you are reading.
: Removes the NetDisk from your computer
Network Direct Attached Storage / NDAS™
38 www.XIMETA.com