Setup For Pppoe; Setup For Mac (Hardware) Address - Ximeta NetDisk Wireless Access Point Router User Manual

NetDisk™ Wireless User Manual

3-3-3. Setup for PPPoE

1. Select Use PPPoE.
2. Input ID and Password given by your ISP.

3-3-4. Setup for MAC (Hardware) Address

Note: To provide Internet service, some Internet service providers may check the MAC
(Hardware) Address of your computer or NIC (Network Interface Card). When you
change your computer or NIC (Network Interface Card), you cannot access the Internet
unless you inform your cable service provider of alterations.
Current Hardware Address : Displays the hardware address that is currently being
Hardware Address
Use Mac Address
XIMETA, Inc
User ID
Password
Service Type
MTU
Idle Time
Connect on Demand : Provides automatic connection and disconnection. The
Important: You should use the Idle Time Out and
the Connect on Demand function together.
DNS Server
Primary DNS
Secondary DNS
Network Direct Attached Storage / NDAS™
: ID given by Internet Service Provider.
: Password given by Internet Service Provider.
: Input the Service Type you are currently using.
: Default is 1452. Only change the default if unexpected
problems occur.
: Allows you to set up a time limit for Internet use.
connection is on when you use Internet and
automatically disconnects when not in use . When you
open the web browser or Click any content on the web
browser, the connection re-establishes itself.
: Default setting is Dynamic. Manually input DNS
information when using Static IP.
: Domain name number allotted by DSL Service
Provider.
: Domain name number allotted by DSL Service
Provider. (the second DNS number may be omitted)
used.
: Click the MAC Clone button to clone your MAC
address so that it can be manually configured.
: Use default Mac Address is selected by default.
Select Use Manual Mac Address to manually
configure the Mac address in the text boxes above.
20 www.XIMETA.com