Ximeta NetDisk Wireless Access Point Router User Manual page 23

NetDisk™ Wireless User Manual
Manual Setup
If you wish to manually input encryption key, remember that the 64Bit-WEP key
should be 10 hex digits. For 128Bit-WEP, the key should be 26 hex digits.
If the client program supports ASCII, You can also manually input ASCII
information. Select Manual and ASCII in the WEP Entry Mode section in order to
manually input the key. (For ASCII, the 64Bit-WEP key should be 5 digits and the
128Bit-WEP key should be 13 digits)
1. Copy or memorize the four Key numbers before Clicking OK.
2. Input the four Key numbers on Wireless Client Cards when you
XIMETA, Inc
[Figure 3-15. Input WEP Key Entry manually]
install the wireless LAN card on your computer to ensure connection
between NetDisk Wireless and Wireless Client Cards.
Example) Data input on the installation program of wireless client card
1) Copy or memorize four Key-Numbers
2) Select one Key-Number
3) Input the Key-Number you selected from NetDisk Wireless on the
installation program of the wireless client card.
Network Direct Attached Storage / NDAS™
Important:
23 www.XIMETA.com