Checking Netdisk Wireless Status; Resetting Factory Defaults - Ximeta NetDisk Wireless Access Point Router User Manual
Wireless access point router
Hide thumbs
Also See for NetDisk Wireless Access Point Router:
- User manual (61 pages) ,
- Quick install manual (10 pages) ,
- User manual (40 pages)
Table of Contents
Advertisement
NetDisk™ Wireless User Manual
3-9. Checking NetDisk Wireless Status
1. Type 192.168.1.1 in the address box of your web browser and a user name and
password prompt will appear.
2. Leave the user name box empty and type your password (Default password is admin).
3. You will see the Status. If you do not see the Status, Select Status on the left menu
panel.
This is only an example, the configuration will be different for your computer.
3-10. Restoring Factory Defaults
Press and hold the Reset button on the rear panel of NetDisk Wireless for more than five (5)
seconds. NetDisk Wireless will automatically reboot in order to apply all default configurations.
XIMETA, Inc
[Figure 3-24. NetDisk Wireless Status]
33
Network Direct Attached Storage / NDAS™
www.XIMETA.com
Advertisement
Table of Contents
Need help?
Do you have a question about the NetDisk Wireless Access Point Router and is the answer not in the manual?
Questions and answers