Table of Contents
Advertisement
IP Camera Web-Client
Video Codec Settings Tab
Primary Stream
Default settings shown for NTSC models
Setting
Options
Frame Rate
1–30 (NTSC)
1–25 (PAL)
Priority
Quality, Bit Rate
48
Figure 4-8
Video Codec Settings Tab Available Functions
Set the Resolution
Set the Frame Rate
Set the Priority for Quality or Bit Rate
Set the Compression Ratio
Set the Target Bit Rate
Set the Maximum Bit Rate (kbps)
Set the GOP (Group of Pictures)
Configuring the Compression Settings
1.
On the Compression Settings tab, in the Statistics area, select the Received check
box to receive in real time the bit rate and frame rates for the current image.
Deselecting the check box disables the refresh rate.
Note
The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
2.
Use
Table 4-3
to set up the streaming resolution and
compression settings.
Table 4-3
Video Streaming Resolutions
Primary Stream Resolutions
1280 x 720
800 x 450
640 x 360
320 x 180
Table 4-4
Compression Settings
Description
The frame rate that is displayed per second. For NTSC, select from 1 fps (lowest)
to 30 fps (highest). For PAL, select from 1 fps (lowest) to 25 fps (highest).
Allows you to set the maximum bit rate and/or target rate value, based on priority
mode settings. This value is the threshold that you do not want the bit rate to
exceed.
Secondary Stream
Default settings shown for NTSC models
Table 4-4
Secondary Stream Resolutions
640 x 360
320 x 180
for the other
Advertisement
Table of Contents
