Trouble Shooting - Hayter SST38/ST42 Operator's Manual

1.41

TROUBLE SHOOTING

FAULT
Blade(s) do not rotate.
Uneven cutting height.
TROUBLE SHOOTING
POSSIBLE CAUSE
Blade drive belt is worn, loose or broken.
Blade drive belt is off pulley.
Tyre pressures are incorrect.
Tractor is not level.
Grass build-up under cutterdeck.
Blade mounting screws are loose.
Blade drive belt tension is incorrect.
1.41
REMEDY
Install new blade drive belt.
Install blade drive belt and adjust
for correct tension.
Check and adjust tyre pressures.
Adjust the height adjustment
cable rod assembly.
Remove grass.
Tighten blade mounting screws.
Adjust blade drive belt.
150005MA010302A