Operating The Tractor. 1.18; Safety Notice; Operator Controls - Hayter SST38/ST42 Operator's Manual

1.18

SAFETY NOTICE

WARNING: PREVENT ACCIDENTS - Before operating the equipment it is essential that;

OPERATOR CONTROLS

1. Sweeper Drive Switch.
2. Throttle Lever with Integral Engine
Choke Control (ST38 only).
3. Cutterdeck Drive Switch.
4. Ignition Switch.
5. Parking Brake Latch.
6. Parking Brake Pedal
7. Fuel Filler Cap
8. Engine Oil Filler Cap
9. Forward/Reverse Pedal
10. Sweeper Collector Lift Lever
11. Height of Cut Lever
12. Engine Choke Control Knob
(ST42 only)
13. Sweeper Collector Latch Locking
Mechanism
14. Steering Wheel.
15. Sweeper Collector Tipping Lever.
16. Sweeper Working Height Lever.
17. Transaxle Bypass Lever.
OPERATING THE TRACTOR
- The operator reads and understands all safety instructions and symbols.
- The operator is familiar with the controls.
- The daily maintenance checks have been properly carried out and the
equipment is in good working order.
- The operator should wear safety clothing and eye protection. Failure to do
so could result in risk to health and safety.
- The area where the equipment is to be used is inspected and all objects
which may be thrown by the mower are removed.
- The operator follows safe working practices when working on slopes.
2
3
4
6
5
12
12
1
11
17
(Hidden)
18
1.18
7
8
14
9
10
13 (Hidden)
16
15
150005MA010302A