Hayter Spirit 41 Instruction Manual
Four wheel push
Hide thumbs
Also See for Spirit 41:
- Owner's handbook manual (40 pages) ,
- Instruction manual (16 pages) ,
- Owner's handbook manual (36 pages)
Related Manuals for Hayter Spirit 41
Summary of Contents for Hayter Spirit 41
- Page 1 Spirit 41 Four Wheel Push Codes 616J Original Version (EN) From Serial Number: 314000001 and up Issued: 14.10.13 Part number: 3374-359 Rev A...
-
Page 2: Table Of Contents
CONTENTS Introduction Heavy Growth Non Grassed Areas Main Features / Specifications Friction Disc Safety Precautions 5 - 6 Maintenance Schedule Training Engine Detail Preparation Mower Maintenance 10 - 13 Safety Symbols 5 - 6 Operation 5 - 6 Carburettor Adjustments Maintenance &... -
Page 3: Introduction
The safety precautions listed in this handbook and all other generally recognised regulations on safety must be observed at all times. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk... -
Page 4: Main Features / Specifications
MAIN FEATURES SPECIFICATIONS Code Weight 29 kg Length 1370 mm Width 472 mm Height 1050 mm Width of Cut 410 mm Height of Cut (7 positions) 13 - 65 mm Cutterblade Speed 2850 rpm Engine Briggs & Stratton Engine Type Series 450E Fuel Type Unleaded Petrol... -
Page 5: Safety Precautions
A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to Always replace worn or faulty parts with genuine Hayter parts. ensure that it is in good condition. A damaged cutterblade must... -
Page 6: Maintenance & Storage
• After striking a foreign object. Inspect the machine for maintenance should only be carried out by a Hayter authorised damage and ensure necessary repairs are made before re- dealer. Never operate the machine with defective guards, or without starting and operating;... -
Page 7: Assembling The Mower Before First Use
If any items are pass the grassbag through the handlebar and hook into position the oil level. missing, contact your local Hayter dealer. (2). Lower the rear deflector to rest on the grassbag. (Refer fig.4) •... -
Page 8: Operating The Mower
OPERATING THE MOWER Controls If the engine does not start after five attempts, refer to Trouble required direction. Shooting. Operate all control levers several times and ensure that the cables To prevent accidents do not raise the front of the mower move freely. -
Page 9: Height Of Cut
OPERATING THE MOWER Height of Cut protect the cutting mechanism. (Refer fig.18) To empty the grassbag, pour out the grass clippings and shake the grassbag vigorously to clean the airways. Good grass To adjust the height of cut: Grip the lever and pull sideways to collection depends on good air flow through the grassbag. -
Page 10: Maintenance Schedule
MAINTENANCE SCHEDULE / MOWER MAINTENANCE Maintenance Schedule Oil Service inner control cables at point of entry and exit from their outer casting. To prevent accidents, stop the engine and disconnect the Check the oil level daily before starting the engine and ensure •... -
Page 11: Air Cleaner Service
MOWER MAINTENANCE Air Cleaner Service Deck Housing any authorised Briggs & Stratton service dealer. The air cleaner system uses a foam element that can be washed Remove grass debris from the top and underside of the deck Check the spark plug gap with a feeler gauge and set at 0.5 mm. and reused. -
Page 12: Cutterblade Removal
DO NOT rotate tools towards the cutting edges to avoid the risk of Cutterblade Sharpening injury should the tool slip. ALWAYS use genuine Hayter replacement parts. A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. -
Page 13: Storage
MOWER MAINTENANCE Storage Clean grass and debris from the engine cylinder, cylinder head cooling fins, under top cowl, around and behind exhaust / To store the handlebar, unscrew the 2 small securing knobs exhaust guard and ensure that the grassbag is clean. sufficiently to allow it to be pivoted forwards to rest against the mower. -
Page 14: Lawn Care Calendar
LAWN CARE CALENDAR To be used as a guide only January July Lawn Stripes There is very little work to do this month apart from brushing Treat the grass with the second application of fertiliser or weed The way to achieve a neat striped effect is for the lawn being away leaves. -
Page 15: Trouble Shooting
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine will not turn Uneven cut Undulating ground conditions Change direction of travel Engine stop lever released Operate engine stop lever over Cutterblade worn Sharpen cutterblade Incorrect oil level Check oil level Cutterblade out of balance Balance the cutterblade Obstruction under deck... -
Page 16: Warranty
Hayter Authorised Service Dealer for clarification. This warranty does not apply to any unit that has been tampered with, altered, misused, abused or used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does not cover for minor mechanical adjustments unless they are due to defective material or workmanship. -
Page 17: Eu Privacy Statement
Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country. -
Page 18: Service Records & Customer Information
2nd Year (24 Months) We certify that this service has We certify that this service has been carried out by an been carried out by an Authorised Hayter Service Dealer Authorised Hayter Service Dealer Date:____________________ Date:____________________ Date of Sale:- Engine Type:-...