Table of Contents
Advertisement
1.18
SAFETY NOTICE
WARNING - PREVENT ACCIDENTAL STARTING :
Always stop the engine and disconnect the spark plug
lead and negative battery lead before cleaning, inspect-
ing or working on the machine.
SAFETY NOTICE
WARNING - PREVENT ACCIDENTS: Before mowing,
thoroughly inspect the area where the mower is to be
used and remove all objects which when contacted by
the mower cutterbar could become dangerous projec-
tiles.
Inspect the area for hidden obstructions which when
contacted by the cutterbar could risk health and safety.
Remember the location of these obstructions and ensure
that you mow around them.
IMPORTANT - PREVENT ENGINE DAMAGE : DO
NOT use the mower on a slope greater than 20 degrees.
HEIGHT OF CUT
To adjust the height of cut: Grip the lever and pull side-
ways to disengage it from the locking notch, then push for-
wards to lower or pull backwards to raise the height of cut.
Finally release the lever at the required position and ensure
it locks firmly into one of the seven setting notches.
Always select a height of cut to suit operating conditions.
Aim to prevent engine overloading and blockages by avoid-
ing low cuts in long grass conditions. Be prepared to make
two cuts when the grass is long.
OPERATING THE MOWER
1. Engine
2. Spark Plug Lead
3. Spark plug
1.18
1
2
STOP
3
CS034
CS031
20 o max.
CS030
CS211
481141EB030299A
Advertisement
Table of Contents
