Service Command Group - GE Digital Energy 1018959 Operating Manual

2.2.5 Service command group

The service command group allows to enable/disable different services. Note that the local (serial)
connection cannot be disabled.
Command Parameters
http-server on | off
https-server on | off
ssh-server on | off
ftp-server on | off
telnet-server on | off
makecert sitename
ssh-fingerprint
ssl-fingerprint
ca-fingerprint
showftp
showlogin
(*) Refer to the Encryption section for details.
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V014.doc
Description
Enable/disable HTTP server (port:80)
on Web server enabled
off Web server disabled
Enable/disable HTTPS server (port:443)
on Secure web server enabled
off Secure web server disabled
Enable/disable SSH encryption (port:22)
on SSH encryption enabled
off SSH encryption disabled
NOTE: SSH encryption enables / disables both SSH (Secure
SHell) and SFTP (Secure FTP)
Enable/disable FTP server (port:21)
on FTP server enabled
off FTP server disabled
Enable/disable Telnet server (port:23)
on Telnet server enabled
off Telnet server disabled
Create new digital certificate for the HTTPS server (*)
sitename The DNS name / IP address of the adapter
Show the SSH key fingerprint (*)
Show the web server digital certificate fingerprint (also
known as thumbnail) (*)
Show the digital certificate fingerprint (also known as
thumbnail) for the CA Root Certificate (*)
Show FTP server info and connections
Show detailed telnet/ssh login information
Page 18/69
Operating Manual SNMP/Web Adapter