Modbus Page; Password Page; Configuration Page; Upgrade Page - GE Digital Energy 1018959 Operating Manual

3.5.4 Modbus page

This page controls the Modbus TCP slave operation. Particularly, the user can:
•
Enable Modbus TCP slave service
•
Select the TCP port on which the Modbus slave will be listening
•
Select the Modbus Slave ID (setting this value to 255 effectively disables slave address check)
•
Enable floating-point handling (note that a non-standard floating point representation is used)
Please refer to the Modbus section of this manual for further details.
NOTE: The Modbus TCP slave service is subject to a specific license. In the default configuration, Modbus
TCP is unlicensed. In this condition, the Modbus page will not be available in the web interface.

3.5.5 Password page

This page allows the currently connected user to modify its password. Clearly, this page only allows
modification to the current users. The account of other users can be managed only by the uspervisor
users in the User section.
NOTE: The password length is limited to 8 chars.

3.5.6 Configuration page

In this page, the SNMP/Web adapter configuration file is shown in a text area. The configuration file can
be exported by pressing the Highlight button and copying the selected text (e.g. CTRL+C) to a separate
application.

3.5.7 Upgrade page

This page shall only be accessed when the SNMP/Web adapter SW is to be upgraded. Refer to the
section for details on the SW upgrade process.
NOTE: Use only GE officially released SW. Only perform the SW upgrade when requested to do so by GE.
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V014.doc
Page 34/69
Operating Manual SNMP/Web Adapter