User Command Group - GE Digital Energy 1018959 Operating Manual

2.2.4 User command group

The user command group is available only to the supervisor user, the only user who can perform user
management.
Command Parameters
supername [name]
showuser
[user]
[http]
adduser [telnet]
[ftp]
[access]
deluser [name]
[user]
[http]
moduser [telnet]
[ftp]
[access]
NOTE: The indicated services refer to the following access methods:
http
Web interface
telnet Remote console interface
ftp File transfer
NOTE: Both username and passwords are case sensitive. It is recommended to always use lower case
for both.
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V014.doc
Description
Change supervisor login name
[name] New supervisor username
NOTE: By default, the superuser is the only configured user
with username and password set to ge and ge.
Show user settings
Add a user
[user] username for the new user
[telnet] 1 – access allowed / 0 – not allowed
[http] 1 – access allowed / 0 – not allowed
[ftp] 1 – access allowed / 0 – not allowed
[access] 'ro' – read-only / 'rw' – read/write
NOTE: After entering the command, the console prompts for
the password, which needs to be re-confirmed.
Mind that the password length is limited to 8 chars.
The command line interface may accept longer passwords,
although only the first 8 characters are significant.
Delete a user
[name] User to be deleted
Modify services and access rights for a user
[user] username for the new user
[telnet] 1 – access allowed / 0 – not allowed
[http] 1 – access allowed / 0 – not allowed
[ftp] 1 – access allowed / 0 – not allowed
[access] 'ro' – read-only / 'rw' – read/write
Controls access with both HTTP and HTTPS protocols
Controls access with both Telnet and SSH (Secure SHell)
protocols plus SFTP (Secure FTP)
Controls access with FTP
Page 17/69
Operating Manual SNMP/Web Adapter