Smtp Section; Smtp Configuration Page; Alarm Notification Page; Log Section - GE Digital Energy 1018959 Operating Manual

3.7

SMTP SECTION

The SMTP page controls the e-mail notification functionality.

3.7.1 SMTP configuration page

The basic SMTP settings are the following:
Parameter Name
SMTP Server
Sender name
Recipent e-mail address
If the SMTP server requires authentication, the following sections shall also be defined.
Parameter Name
Account
Password

3.7.2 Alarm notification page

This page is used to configure the alarm notification via trap and/or e-mail. Every alarm is listed, and the
user may enable the notification via trap and/or e-mail upon alarm (de)activation.
Further to this, alarm handling can be enabled/disabled through the Enable checkbox. When disabled,
an alarm occurrence is totally filtered – the alarm will never appear active, it will not be reported by any
mean and it will not be logged.
3.8

LOG SECTION

This section offers access to the System and the UPS log. The System log collects information on user
activity, while the UPS log lists UPS alarms. Both the logs can be exported by copying the relevant text
from the page (Highlight button gollowed by CTRL+C).
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V014.doc
Description
Hostname or IP-address of the SMTP server
The MAIL FROM field of the mail message
The RCPT TO field of the mail message
Description
Username for SMTP server authentication
Password for SMTP server authentication
Page 36/69
Operating Manual SNMP/Web Adapter