Table of Contents
Advertisement
3-2-4 Port Mapping for Special Applications
Some applications require more than one connection at a time; these
applications won't work with simple NAT rules. In order to make these
applications work, you can use this function to let these applications
work.
1
2
Here are descriptions of every setup item:
Enable (1):
IP Address (2):
Computer Name (3): Pull down the menu and all the computers
TCP Port to Open (4): This is the out going (Outbound) range of TCP port
3
Check this box to enable special applications and
uncheck this box to disable the virtual server.
Input the IP address of the computer that you want
to open the ports.
connected to the router will be listed here. You can
easily select the computer name without checking
the IP address of the computer.
numbers for this particular application.
128
4
5
7
8
11
12
14
6
9
10
13
Advertisement
Table of Contents
