Configuration Information - Factory Integrated Models - HP ProLiant DL385 Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are NOTE: NOTE: NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start NOTE: NOTE: NOTE:
with a CTO Chassis.
NOTE: FIO indicates that this option only available as a Factory Installable Option. NOTE: NOTE: NOTE:
Step 1: Base Configuration (choose one of the following configurable models) Step 1: Base Configuration (choose one of the following configurable models) Step 1: Base Configuration (choose one of the following configurable models) Step 1: Base Configuration (choose one of the following configurable models)
HP Models HP Models HP Models HP Models
Step 1A: Choose Storage Controller (must choose only one of the following) Step 1A: Choose Storage Controller (must choose only one of the following) Step 1A: Choose Storage Controller (must choose only one of the following) Step 1A: Choose Storage Controller (must choose only one of the following)
HP Storage Controllers HP Storage Controllers HP Storage Controllers HP Storage Controllers
Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted) noted) noted) noted)
HP Processors HP Processors HP Processors HP Processors
HP Memory HP Memory HP Memory HP Memory
HP ProLiant DL385G5p Rack CTO Chassis
Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with:
(8) SFF Serial Attached SCSI (SAS) Drive Bays
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total)
PCI-Express Riser Cage
One IEC Power cord
Hot plug fans (fully redundant)
Rack (2U), (3.5-inch)
HP Smart Array P400 with 256MB with Heat Sink
NOTE: NOTE: PCI Express. Supported on the DL385 G5p only.
NOTE: NOTE:
HP Smart Array P400 with 512BBWC with Heat Sink
NOTE: PCI Express. Supported on the DL385 G5p only. NOTE: NOTE: NOTE:
HP Smart Array E200/128 BBWC Controller
NOTE: PCI Express. NOTE: NOTE: NOTE:
HP Smart Array P800/512 BBWC Controller
NOTE: PCI Express. NOTE: NOTE: NOTE:
HP Smart Array E200/64 FIO Controller
Quad-Core Processors Quad-Core Processors Quad-Core Processors Quad-Core Processors
AMD Opteron™ Processor 2389 (2.9 GHz, 75 Watts) Kit, FIO
AMD Opteron™ Processor 2387 (2.8 GHz, 75 Watts) Kit, FIO
AMD Opteron™ Processor 2381HE (2.5 GHz, 55 Watts) Kit, FIO
AMD Opteron™ Processor 2376HE (2.3 GHz, 55 Watts) Kit, FIO
AMD Opteron™ Processor 2372HE (2.1 GHz, 55 Watts) Kit, FIO
AMD Opteron™ Processor 2384 (2.7 GHz, 75 Watts) Kit, FIO
AMD Opteron™ Processor 2382 (2.6 GHz, 75 Watts) Kit, FIO
AMD Opteron™ Processor 2378 (2.4 GHz, 75 Watts) Kit, FIO
NOTE: DIMM banks are active only when the corresponding processor socket is NOTE: NOTE: NOTE:
populated.
2 GB REG PC2-6400 2 x 1 GB Kit
4 GB REG PC2-6400 2 x 2 GB Kit
DA - 13161 North America — Version 23 — February 19, 2010
HP ProLiant DL385 Generation 5p (G5p) HP ProLiant DL385 Generation 5p (G5p) HP ProLiant DL385 Generation 5p (G5p) HP ProLiant DL385 Generation 5p (G5p)
500527-B21
507808-B21
508833-B21
411508-B21
381513-B21
405528-B21
533916-L21
533918-L21
535682-L21
516259-L21
516257-L21
500535-L21
500104-L21
500537-L21
497763-B21
497765-B21
Page 17