Din-Rail Mounting; Figure 2.6: Installation To Din-Rail Step 1 - Advantech EKI-7529MI User Manual

8+2 100 fx port unmanaged industrial ethernet switch

Table of Contents

2.3.2

DIN-rail Mounting

You can also mount EKI-7529MI, EKI-7529MI/ST on a standard DIN-rail by below

steps.

The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit

is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.

First, hang the EKI-7529MI, EKI-7529MI/ST to the DIN-rail with angle of inclination.

See figure 2.6.

Chapter2

Table of Contents

Eki-7529st Eki-7529mi/st