Restore Factory Default Setting - Grandstream Networks GXW-410x User Manual

R
ESTORE
WARNING!
Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will
not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP
service provider.
The ONLY way to restore default factory settings is as follows:
1. Unplug the Ethernet cable.
2. Locate the needle sized hole on the back panel of the gateway next to the Power connection.
3. Enter a thin object in this hole and keep it pressed for about 7 seconds.
4. You will see the Network port LEDs (green and orange) go off and on simultaneously; this
indicates the reset went through.
5. All settings have been erased and the gateway is back to factory settings.
Grandstream Networks, Inc.
VoIPon www.voipon.co.uk
F D
ACTORY EFAULT
Restoring the Factory Default Setting will DELETE all configuration information of the phone.
sales@voipon.co.uk
S
ETTING
GXW-410x User Manual
Firmware 1.0.0.53
Tel: +44 (0)1245 808195
Page 31 of 37
Updated: 04/2007
Fax: +44 (0)1245 600030