Connecting To The Mains; Display Of Connection Quality; Synchronising Two Gigaset Homeplug Av 200 - Siemens Gigaset HomePlug AV 200 User Manual

Installation

Connecting to the Mains

ì
Insert the Gigaset HomePlug AV 200 into the socket.

Display of connection quality

The Link LED indicates the bandwidth of the received data by its colour and in so doing
provides information about the HDTV suitability of the sockets used.
LED Display
Off
Green
Yellow
Link
Red
Flashing

Synchronising Two Gigaset HomePlug AV 200

All devices with an identical network ID communicate with one another ("Security in the
Network" on page 5). Synchronisation can be used to change this network ID in your
Powerline network. The network ID is always created by a random generator and cannot
be selected. A new (random) network ID is assigned to two adapters during the course
of the synchronisation process.
Carry out the following steps here:
u
Connect all Gigaset HomePlug AV 200 to the mains supply.
u
Reset the network ID of each individual adapter (p. 11).
u
Press the synchronisation keys for both adapters in succession for two seconds each.
The Link LEDs on the two adapters light after a few seconds and the Powerline network
is synchronised.
10
Status
No Powerline connection available.
Excellent connection, multiple HDTV transmission possible.
Good connection, multiple HDTV transmission cannot be
guaranteed.
Electrical faults are impairing the connection:
HDTV cannot be guaranteed.
Data being transferred.