Download  Print this page

Siemens AEW310.2 Manual

Pulse adapter
Hide thumbs
   

Advertisement

Use
Functions
CE1N5383en
2016-02-12
Pulse Adapter
The AEW310.2 pulse adapter acquires and handles the pulses from 1 or 2 con-
sumption meters with pulse output and transmits the data to an M-Bus-network.
For setting the parameters, the pulse adapter can be programmed via M-Bus
interface before connecting to the network.
The pulse adapter is a component of the M-Bus system. It is used when data of pulse
output meters shall be collected by a M-bus system. Such devices can be meters for
hot water, cold water, gas, electricity, etc.
Acquisition of the pulses delivered by the connected consumption meters
Monitoring the connecting cable in the case of metering devices with NAMUR circuit
Handling of pulses and storage of consumption data and set day values
Transmission of data telegrams on demand to the M-bus master
5
AEW310.2
Building Technologies
383

Advertisement

Table of Contents
loading

  Summary of Contents for Siemens AEW310.2

  • Page 1 Pulse Adapter AEW310.2 The AEW310.2 pulse adapter acquires and handles the pulses from 1 or 2 con- sumption meters with pulse output and transmits the data to an M-Bus-network. For setting the parameters, the pulse adapter can be programmed via M-Bus interface before connecting to the network.
  • Page 2: Type Summary

    Connection of 2 meters to the connecting cable by means of the cable connectors sup- plied with the unit. Ordering When ordering, please give type reference: AEW310.2 Equipment combinations When installing, the pulse adapter must be programmed with the data set delivered with the parameter setting software for the respective meter.
  • Page 3: Electrostatic Sensitive Devices

    Then, squeeze the connector with a pair of pliers. This connection cannot be separated and offers degree of protection IP54. Only for AEW310.2/DK: With the housing cover open, insert the meter connecting cables with the O-ring from the rear of the unit into the cable strain relief and connect the cables to the terminal block.
  • Page 4: Technical Data

    Perm. ambient temperature Transport and storage 25…+60 °C Operation 0…55 °C Weight 0.3 kg The documents can be downloaded from http://siemens.com/bt/download. Connection diagrams Connection of any type of meters with pulse output INP 1 INP2 AEW310.2 pulse adapter P1, P2 Meter with pulse output...
  • Page 5 Dimensions 27,3 95,5 Dimensions in mm Connecting cable length is 350 mm. Building Technologies Pulse Adaptor AEW310.2 CE1N5383en HVAC Products 14.12.2007 2016-02-12...
  • Page 6 Published by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 41-724 24 24 © Siemens Switzerland Ltd 2007 www.siemens.com/buildingtechnologies Delivery and technical specifications subject to change Building Technologies Pulse Adaptor AEW310.2 CE1N5383en 2016-02-12...