For Your Convenience; Programming A Function Key - NEC XN120 Vision User Manual

For Your Convenience

Programming a Function Key

Programmable Function Keys can be assigned as Appearance Keys (e.g. Trunks) or General Keys (e.g.
DSS/One-Touch). Press the Function Key to activate the assigned function without dialling the Service Code.
General Key Code
CALL
8 5
1
u
An existing Appearance Key cannot be overwritten without the Appearance Key first being erased.
u
Programmable Function Keys (General Key Code) can be erased by entering Service Code 00.
Common Service Codes:
01
DSS/One-Touch Key
03 DND Key
04 Background Music (ON/OFF)
05 Headset Key
08 Incoming Caller ID List
19
External Zone Paging
20 External All Call Paging
21 Internal Zone Paging
22 Internal All Call Paging
27 Abbreviated Dial – Common/Personal
28
Abbreviated Dial – Group
Programming a DSS/One-Touch Key
Programmable Function Keys can be assigned as DSS (Direct Station Selection) or One-Touch Keys. You can
place an Outside or Intercom call by pressing this key without dialling the number.
CALL
8 5
Trunk Telephone Number
9
? ?
Extension Number
? ? ?
u
Function Keys with one or two colour LEDs programmed as DSS keys will provide extension status
indication, Idle=Off, Busy=lit. This is known as Busy Lamp Field (BLF) indication.
u
When storing an outside telephone number, the Trunk Access Code (normally 9) must be added to the
start of the number. Up to 36 digits can be stored.
u
To program another key, press the next Programmable Function Key instead of the SPK Key to finish.
Service
Function Key
Code
? ?
10
Call Forward – Immediate
11 Call Forward – Busy
12 Call Forward – No Answer
13 Call Forward – Busy/No Answer
14 Call Forward – Dual Ring
15
Call Forward – Follow Me
16 Call Forward – Select Option
17 Call Forward – Device
29 Repeat Redial
30 Saved Number Redial
31
Memo Dial
Function Key
1 0
HOLD SPK
2
SPK
Additional Data
?
1