Performing A System Test - Magellan MG6250 Console User Manual

Performing a System Test

The System Test option allows you to run diagnostics on certain system features. System test that can be
performed include signal strength, reporting, zones, remotes, and hardware. If a trouble is detected during a
system test, contact your installer to resolve the issue.
WARNING:
close proximity to the MG6250 when performing the hardware test to avoid any damage to your
hearing.
To access the System Test menu:
1.
2.
3.
4.
MG6250 Console • User Guide
When the system hardware is tested, the speaker and sirens will also be tested. Do not be in
Press the menu key.
Select 07-SYSTEM TEST, then press ok.
Enter your master code (default: 1234).
Select the system test you would like to run, then press ok. Follow the on-
screen testing instructions.
System Ready
menu
07-SYSTEM TEST
ok next exit
Enter a Code
back
Signal Strength?
ok next exit
Chapter 4 - User Features | 35