Setting The Alarm Clock - Magellan MG6250 Console User Manual

Setting the Alarm Clock

You can also use the MG6250 system as an alarm clock. At the programmed time,
the system will begin to play a selected tune. When the alarm clock is enabled, the
bell symbol will appear in the upper left corner of the screen.
To set the alarm clock:
1.
2.
3.
4.
5.
30 | Chapter 4 - User Features
Press the menu key.
Select 03-ALARM CLOCK, then press ok.
Pressing the left key will toggle the alarm clock between ON and OFF. To
continue, press next.
Set the time for the alarm. Select AM or PM using the middle key, then press
ok.
Use the scroll keys to select the tune or beep that will be played. To exit, press
ok.
System Ready
menu
Alarm clock
enabled
System Ready
menu
03-ALARM CLOCK
ok next exit
Alarm Clock: off
on next back
Time: 12:00 PM
ok AM back
Tone: Tonality 1
ok next back
MG6250 Console • User Guide