Page 1
All-In-One Wireless Security System V2.0 Model #: MG-6160 X10 Operation User Guide We hope this product performs to your complete satisfaction. Should you have any questions or comments, please visit www.paradox.com and send us your comments.
X10 Activation/Deactivation when System Armed..................7 X10 Activation/Deactivation on Entry Delay ....................7 X10 Activation/Deactivation on Alarm......................7 Manually Activating/Deactivating X10 Outputs ................... 8 Using the Center Keypad..........................8 Using the Action Keys..........................8 1 Magellan - X10 Operation User Guide...
Enabling/Disabling the X10 Outputs When programming Magellan’s X10 outputs from within the X10 Setup menu (see “Accessing the X10 Setup Menu” on page 2), you will be instructing Magellan whether to activate or deactivate one or more X10 outputs. You have the choice of either activating or deactivating ALL the outputs at once or individual outputs.
The Magellan console will be assigned a House Code from A to P while all assigned X10 receivers are assigned a specific address consisting of the same House Code as the console as well as a unique Unit Code from 1 to 8. This is how Magellan will know which X10 receiver to activate and/or deactivate which will in turn activate and/or deactivate its corresponding device.
X10 Programming Magellan offers a variety of programming choices for your X10 outputs (receivers). The X10 outputs can be programmed to follow a time schedule or a specific event. You can select all X-10 outputs to be affected at the same time or select specific X10 outputs to be affected.
] key (ok) to program the Start Time of the schedule. Depending on the time ACTION format being used within the system (see the Magellan Reference and Installation Manual), enter the time you wish the second time schedule to take effect and then press the left [...
X10 Outputs” on page 2 for more information. X10 Activation/Deactivation when System Armed Use this option to activate or deactivate Magellan’s X10 outputs when your system is armed. To do so: 1. Access the X10 Setup menu (see “Accessing the X10 Setup Menu” on page 2).
ACTION page 2 for more information. Manually Activating/Deactivating X10 Outputs Magellan’s X10 outputs can be manually activated or deactivated through Magellan’s Center keypad or through the Action keys. Using the Center Keypad 1. Press the [*] key. 2. Press keys [1] to [8] from the Center keypad to activate X10 outputs 1 to 8.
Limited Warranty Paradox Security Systems Ltd. (“Seller”) warrants its products to be free from manufacturing defects in materials and workmanship for one-year following the date of manufacture. Seller will, within this period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user.