Remote Controls at a Glance
The remotes shown in figure 6 are those which are available with your MG6250 alarm system. For detailed
information on each of these remotes, refer to the remote's user documentation. Your installer can add other
functions and/or change the default settings of your remote controls. To use the functions programmed in
your remote control, press and hold the desired key(s) for at least two seconds. Your remote control has been
programmed with the following features by default.
Figure 6: Compatible Remote Controls
REM1/RAC1
MG6250 Console • User Guide
= Full arm
= Disarm
= Stay arm
= Sleep arm
= Request feedback from the Magellan
system
= Unlock remote
[ARM]
= Full arm
[SLP]= Sleep arm
[STAY]
= Stay arm
[OFF]= Disarm
REM3
= Full arm
= Stay arm
= Sleep arm
= Disarm
REM2/RAC2
= Full arm
= Disarm
= Stay arm
= Sleep arm
REM15
Chapter 2- Getting Started | 13