Alarm Memory Display - Magellan MG6250 Console User Manual

Alarm Memory Display

When an alarm has occurred on your system, the MG6250 console will store that alarm in its alarm memory.
All zones where alarms have occurred will also be stored in the alarm memory. The MG6250 console will
indicate that there is an alarm in memory by displaying the information symbol
console's LCD screen. Alarm messages can be viewed through the alarm memory menu, or by pressing the
menu action key. For more information on viewing alarms through the alarm memory menu, refer to section
Alarm Memory Display, on page 23.
To view alarms via the
1.
2.
NOTE: Once the alarm has been viewed using this method, the alarms will be cleared and the
removed from the display. You can still view the alarm messages via the Alarm Memory menu. For more
information refer to Alarm Memory Display on page 23.
MG6250 Console • User Guide
menu action key:
Press the menu action key.
Press the up and down scroll keys to scroll through the list of alarm
messages. Once the alarm messages have been viewed, select the exit
key.
(see page 10) on the
Area 1 Verify
menu
Zone 02 in alarm
Area 1
will be
Chapter 3 - Arming and Disarming | 23