Magellan MG6250 Console User Manual page 47

15. If your system is divided into areas, you will be given the option to modify the
16. Set the area 2 exit delay time between 0 and 255 seconds, then press ok.
17. Select the tone or beep for the area 2 exit delay, then press ok.
18. After an audible alarm, the built-in siren will stop upon the disarming of the
19. To modify the area 1 bell cutoff delay, press ok.
20. Set the area 1 bell cutoff delay time between 0 and 255 minutes, then press ok.
21. If your system is divided into areas, you will be given the option to modify the
MG6250 Console • User Guide
area 2 exit delay, press ok.
system or when the Bell Cut-off Timer has elapsed, whichever comes first. To
modify the bell cutoff delay, press ok.
area 2 bell cutoff delay, press ok.
Area 2
ok next back
Delay: [045] sec
ok clear back
Tone: Tonality 1
ok next back
Bell Cutoff Del?
ok next back
Area 1
ok next back
Delay: [004] min
ok clear back
Area 2
ok next back
Chapter 5 - System Setup | 47