Panic Alarms - Magellan MG6250 Console User Manual

Panic Alarms

Your system can be programmed to send an alarm to your monitoring station, requesting help from the
police, a medical facility, the fire department, or anyone you wish when you press a pre-determined
combination of keys on MG6250's main keypad.
To generate a panic alarm:
1.
2.
NOTE: Programming your system to send an alarm to your central monitoring station, requesting help from a
medical facility, is not permitted in UL installations.
Figure 10: Panic Alarm Keys
(Auxiliary Panic)
62 | Chapter 6 - Fire and Panic Alarms
Press the OFF key.
Press and hold the appropriate panic key for 2 seconds. Your installer can program the alarm to be either
silent or audible.
Panic 2
Panic 1
(Non-medical
Emergency
Panic)
Panic 3
(Fire Panic)
MG6250 Console • User Guide