Auto-Arming - Magellan MG6250 Console User Manual

Auto-arming

If you sometimes forget to arm the system before going to bed or before leaving for work, you can configure
the system to auto-arm at certain times during the day.
To configure auto-arm settings:
1.
2.
3.
4.
5.
6.
MG6250 Console • User Guide
Press the menu key.
Select 08-SYSTEM SETUP, then press ok.
Enter your master code (default: 1234).
Scroll through the options and select 06-Auto Arming, then press ok.
To select which area to arm, press next. To modify, press ok.
To select the arming level, press next. To modify, press ok.
System Ready
menu
08-SYSTEM SETUP
ok next exit
Enter a Code
back
06-Auto Arming
ok next back
Area 1?
ok next exit
Auto Arm Full
ok next back
Chapter 5 - System Setup | 49