Magellan MG6250 Console User Manual page 48

22. Set the area 2 bell cutoff delay time between 0 and 255 minutes, then press ok.
23. When this feature is enabled, the siren will squawk when you arm/disarm the
24. To modify the pre-alarm delay, press ok.
25. Set the pre-alarm delay time between 0 and 255 minutes, then press ok.
48 | Chapter 5 - System Setup
system. To enable or disable the bell squawk feature, press ok. Press next to
return to the previous menu.
Delay: [004] min
ok clear back
Bell Squawk?
ok next back
Pre-Alarm Delay?
ok next back
Delay: [045] sec
ok clear back
MG6250 Console • User Guide