Setting Delays And Tones - Magellan MG6250 Console User Manual

Setting Delays and Tones

This setting allows you to change the duration of the exit delay as well as the tune/beep that is played during
the exit delay.
To set the exit delay and tone:
1.
2.
3.
4.
5.
6.
MG6250 Console • User Guide
Press the menu key.
Select 08-SYSTEM SETUP, then press ok.
Enter your master code (default: 1234).
Scroll through the options and select 05-Delays&Tones, then press ok.
To modify entry delay 1, press ok.
Set the entry delay 1 time between 0 and 255 seconds, then press ok.
System Ready
menu
08-SYSTEM SETUP
ok next exit
Enter a Code
back
05-Delays & Tones
ok next exit
Entry Delay 1?
ok next back
Delay: [045] sec
ok clear back
Chapter 5 - System Setup | 45