Pager Reporting; Bell Cut-Off Timer; System Test - Magellan MG-6060 User Manual

Pager Reporting

Transmit personalized numerical messages from the Magellan console to a pager using this communicator format. To program the
Magellan console with this communicator setting:
menu
Master code

Bell Cut-Off Timer

After an audible alarm, Magellan's built-in siren will stop upon disarming of the system or when the Bell Cut-off timer has elapsed,
whichever comes first. To program the Bell Cut-off timer:
menu
Master code

System Test

Use this menu to test your Magellan system. This menu will initiate tests for Magellan's assigned zones, remote controls, reporting
feature as well as some of Magellan's hardware (lights, speaker and siren). This menu will also display any troubles that the system may
be experiencing. Use the [
desired test. Simply follow the on-screen instructions to perform the test. To access the System Test menu:
menu
Master code
Advanced Features
Technical Manuals Online! - http://www.tech-man.com Technical Manuals Online! - http://www.tech-man.com
next next
next next
NEXT ] action key to scroll through the available system tests and then press the [
next
Press until
desired test
ok ok
Enter desired
next ok
Enter delay
time in minutes
ok
WARNING! When testing the hardware, the speaker and sirens will also be
tested. Do not be in close proximity to the Magellan console when performing
the hardware test to avoid any damage to your hearing.
ok ok
numerical message
pager #
ok
OK ] action key to access the
ok
Enter desired
43