Bypassing Zones - Magellan MG6250 Console User Manual

Bypassing Zones

Bypassing a zone allows you to ignore (deactivate) specified zones the next time the system is armed. You
can bypass certain zones when you arm the system. When a zone is bypassed, it will be ignored the next time
you arm the system. Once the system is disarmed, the system will "unbypass" the zone. Zones that can be
bypassed are defined by your installer.
NOTE: Fire zones cannot be bypassed. For more information on fire zones, refer to Fire Alarms on page 58.
To bypass a zone:
1.
2.
3.
4.
26 | Chapter 4 - User Features
Press the menu key.
Select 01-BYPASS ZONES, then press ok.
Zones that are already bypassed are displayed first, followed by the rest of the
zones. Scroll through the zones and use the left menu key to bypass or
unbypass zones.
Press exit to return to the previous menu.
System Ready
menu
01-BYPASS ZONES
ok next exit
Zone 01 BYPASS
unbyp next back
End of List
next exit
MG6250 Console • User Guide